Applications: Process Control Equipment, Weighing Calibration Tool, Dynamic Fatigue Tests, Aerospace Test Bed, Robotics and Effectors, Laboratory and Research

　　Industries: General Industry

　　Description: The FN3042 is highly suited for use in test benches and fatigue tests. Due to the mechanical design, the FN3042 is especially durable. It measures tension and compression in standard ranges from 0-1 klbf to 0-100 klbf and is able to undergo more than 1000000 cycles of full scale with very little change in zero offset stability. With many years of experience as a designer and manufacturer of sensors, Measurement-Specialties often works with customers to design or customize sensors for specific uses and testing environments. To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use.

　　Features:

　　Full Scale Range : from 0-5 kN to 0-500 kN [0-1 klbf to 0-100 klbf]
　　Tension and Compression
　　Accuracy: 0.25% F.S.
　　Skydrol Compatible on Request
　　High Level Output Model with Integrated Amplifier

　　典型應用: 過程控制設備，校驗儀，動態疲勞測試，航空航天測試臺，機器人末梢執行器，實驗室

　　行業: 工業控制

　　產品描述:

　　FN3042非常適合測試臺和疲勞測試。由于其特殊的機械結構，F(xiàn)N3042特別耐用，用于拉力和壓力測量，標準量程從0-1 klbf 到 0-100 klbf，壽命達到一百萬次，并且零點漂移非常小。作為擁有多年經驗的傳感器設計和制造商，MEAS常常與客戶合作，按要求定制適合特殊用途和測試環境的傳感器。同時，我們也根據客戶需要提供成套系統。配套元件（傳感器，電源，放大器和數顯系統）配置統一，經過校正，可供客戶立即使用。

　　特點:

　　量程：從0-5 kN 到 0-500 kN [0-1 klbf 到 0-100 klbf]
　　拉力和壓力測量
　　精度：0.25% F.S.
　　兼容特種液壓工作油
　　可選放大輸出

　　FN3042疲勞測試力傳感器更多技術參數及規格書下載請瀏覽：http://www.sensorway.cn/sensors/575.html
　　
　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。