Use this time delay relay from Phoenix Contact to control the time at which your electrical device is switched on or off. You can use it in four ways: as a switch-on delay, as a switch-on delay and control contact, as a release delay and control contact, or as a flashing beginning with pulse. It uses an SPDT (single-pole, double-throw) switch to change quickly between states.
An easy-to-read LED (light-emitting diode) signal shows you the current state of the device. The green LED tells you it's on, and the yellow one lets you know it's in a relay state. You can adjust the time range between 0.1s and 300 minutes.
This relay is housed in PA (polyamide) material, which regulates its temperature to prevent overheating. Mount it tool-free on a DIN rail. The narrow (6.2mm wide) body means it fits into small spaces with ease.
? Service life of up to 20 million cycles for reliable long-term use
? UL 94 V-0 flammability rating means flames are extinguished within 10 seconds
? IP20 (ingress protection) rating for finger safety
| 屬性 | 數值 |
|---|---|
| 電源電壓 | 19.2 → 30V 直流 |
| 安裝類型 | DIN 導軌 |
| 觸點數 | 1 |
| 時間范圍 | 0.1 s → 300min |
| 計時器功能數目 | 多功能 |
| 觸點配置 | 單刀雙擲 |
| 時間增量 | 分鐘，秒 |
| 最大電壓 | 30V 直流 |
| 最大電流 | 6A |
| 系列 | PLC-TR-1T-MUL-300M |
| 電源 | 外部 |
| 端子類型 | 螺釘 |
| 最小電壓 | 19.2V 直流 |
| 開關配置 | SPDT |
| 深度 | 80mm |
| 最高工作溫度 | +65°C |
| 寬度 | 86mm |
| 長度 | 6.2mm |
