iDCS-8830是一分布式的遠程I/O系統,上位機可通過不同的工業通訊協議與iDCS-8830的I/O達到數據截取及控制,使用者可將iDCS-8830安裝在接近工業現場以降低現場設備到I/O的布建成本。
● 廣泛的應用
通過各種工業協議及基本數字、模擬、計數器及HART的支持,iDCS-8830提供高度整合及具經濟效益的解決方案給各種工業應用場合
● 彈性
所有安裝在iDCS-8830上的模塊具備單一或雙重的運作,通過安裝相同的模塊及簡單的設定,不需額外的配線便可輕易的提升應用層級
● 多種工業通訊標準的支持
iDCS-8830提供多種工業界較常使用的通訊協議,讓使用者可輕松的與各種現行的控制器或PLC做整合
● 實時更新的I/O數據
在iDCS-8830上的I/O模塊通過主動的方式將I/O信道的數據更新至通訊模塊,因此降低I/O數據的更新時間以及確保取得最實時的I/O數據
● 快速的I/O備援切換時間小于1ms
iDCS-8830在所有的I/O備援切換上,皆提供小于1ms的特色,使I/O控制及獲取上有最佳的表現
● 高度信賴的系統
iDCS-8830提供了許多功能上面的增強,使系統更為穩定極具信賴
CPU module | ||
CPU | 80186 or compatible (16-bit and 80MHz) | |
SRAM | 512KBytes | |
Flash | 512 KB; Erase unit is one sector (64K bytes); 100,000 erase/write cycles. | |
EEPROM | 16 KB Data retention: 40 years; 1,000,000 erase/write cycles. | |
64-bit Hardware Serial Number | Yes | |
Built-in Watchdog Timer | Yes (0.8 second) | |
Short Circuit Protection | Yes | |
Power-on Value | Yes, Programmable | |
Safe Value | Yes, Programmable | |
Communicate Interface | ||
COM 1 | RS-232 (to update firmware) | |
CAN Port | Internal communication with the CAN I/O modules | |
Ethernet Port | 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX, LE indicator) | |
I/O Expansion Slots | ||
Slot Number | 8 | |
Hot Swap | Yes | |
Auto Configuration | Yes | |
Power | ||
Protection | Power reverse polarity protection | |
Isolation | 1 kV | |
Power requirement | +10 ~ +30 VDC | |
Power supply | 40 W | |
Mechanical | ||
Dimensions (W x L x H) | 374 x 132 x 100 mm | |
Installation | DIN-Rail or Wall Mounting | |
Environment | ||
Operating Temperature | -25 ~ +75 °C | |
Storage Temperature | -30 ~ +80 °C | |
Humidity | 10~ 90%, Non-condensing |
當前位置: 首頁 > 現場總線I/O單元-冗余單元系列樣本